MISSION

700

Revisited as a sister model to the eagerly anticipated reintroduction of the Mission 770 – a model which heralded the return to UK manufacturing for the Mission brand; the Mission 700 takes what was referred to as an ‘industry benchmark, in the original 700 model, but utilises Mission’s 45 years of evolution and development in loudspeaker design.

Led by Mission’s Director of Acoustic Design, Peter Comeau, the new Mission 700 bears a striking aesthetic resemblance to the original. However, there are many complex innovations and improvements that bring this revered model bang up to date.

As with the flagship 770, Mission has developed a new polypropylene bass/midrange driver and model-specific motor system. This transducer not only upgrades the loudspeaker’s integral design to take account of modern power handling and dynamic requirements, but it also maintains the extended response and low colouration of the original model with all the hallmarks and distinction of a class-leading loudspeaker. From the rigid, cast chassis to low-density surround, every aspect has been revisited to offer a driver with improved rigidity and precision-controlled cone-termination for dynamic performances and offer tight, fast, energetic output.

The distinctive reflex port has been carefully profiled both internally and externally to achieve very low distortion and extension to below 38Hz in-room – quite an achievement from a cabinet of this size!

Employing a new lightweight, coated microfibre dome for the high-frequency driver, the Mission 700 replicates the flagship 770 with a specially damped rear chamber that offers super smooth treble performance, largely thanks to the resonance control offered by such a design.

The Mission 700 was a precursor for what would become a Mission standard in an unconventional driver array, something Mission refers to as ‘Inverted Driver Geometry’. Not just a design statement, IDG is a staple of Misson loudspeaker design from the 700 onwards. By positioning the treble unit below the bass/midrange driver, the length of the path is equalised so the sound waves coincide at the listener’s head height. This principle improves ‘time alignment’. Such design requires more than just inverting the speaker cabinet. Every aspect of the industrial and mechanical design requires a precision calculation to ensure the positioning, spacing and alignment aids the objective of optimum ‘time alignment’. This is perfected by an artisan-level crossover design.

General Description 2-way vented-box / standmount
Enclosure Type Bass reflex
Transducer Complement 2-way
Bass Driver 6.5" (165mm) mineral loaded polypropylene cone
Treble Driver 1.25" (28mm) soft dome
Sensitivity (2.83V @1m) 86dB
Recommended Amplifier Power 25-150W
Peak SPL 106dB
Nominal Impedance 8Ω
Minimum Impedance 5.2Ω
Frequency Response (+/-3dB) 45Hz ~ 20kHz
Bass Extension (-6dB) 38Hz
Crossover Frequency 3.0kHz
Cabinet Volume (in litres) 24.8L
Height (on plinth) 510mm
Width 260mm
Depth (with terminals) (270+22)mm
Carton Size 680 x 410 x 630mm
Net Weight 12.8kg/pcs

Retail price is for 1 pair.